verticalpumps.jpg    horizontalpumps.jpg   custombuiltpumps.jpg      

HORIZONTAL BPO METALLIC PUMPS

Manual size 130 kb

The PPH series - HORIZONTAL BPO PUMPS have been designed to cater to a wide range fo application in the process, chemical, petrochemical and the allied industries. It is an open or closed impeller-back pull out-single stage-end suction-centrifugal pump, available in wide range of corrosion resistant materials. Provision is made for impeller movement-axially to compensate for wear .


Features
  1. Capacity upto 800 m3/hr in many models.
  2. Head range upto 150 Mts.
  3. Heavy duty casings-minimum 3 mm corrosion allowance.
  4. All casings withstand 16 bar pressure at 200 degrees celsius and will operate in the temperature range from minus 70 degree celsius to 260 degree celsius.
  5. Flange to different standards to suit customer requirements.
  6. Pumps meet the design parameters of ISO-2858 and API-610 upto 175 degree celsius.
  7. Manufactured in 50 different models.
  8. Can be offered with various types of mechanical seals or gland packing to suit application.
  9. Fitted with closed, semi open or open impellers depending upon process requirement.
  10. Jacketed pumps can be offered to handle liquids at elevated temperatures.
Horizontal BPO pumps
Horisontal pump
  1. IMPELLER
  2. IMPELLER CASING
  3. BACK PLATE
  4. SHAFT
  5. SHAFT SLEEVE
  6. BEARING HOUSING
  7. DRIVE END BEARING
  8. FAR END BEARING
  9. GLAND PACKING

Materials Range
  • Stainless steels to various ASTM Specification
  • Hastelloy B, C
  • Alloy-20, CD 4M, HV-9
  • Ni resist
  • Acid resisting bronzes
  • Nickel (CZ 100)
  • Monel and Inconel Alloys
  • And many other exotic materials

NON METALLIC PUMPS 

Features

  • Manufactured in 30 different models.
  • Capacities from 3 m3 /hr to 300 m3 /hr.
  • Head upto 60 metres.
  • Can be fitted with suitable mechanical seal to suit applications.
  • Can handle highly corrosive acids like HCl, HF, H2SO4,etc., in varying concentrations and temperatures, highly abrasive slurries, all alkalies and salt solutions
Non metallic pumps

The Materials of Construction :

  • Ultra High Molecular Weight Poly Ethylene (UHMW-PE)
  • Poly Propelene
  • PVDF

CROSS SECTIONAL ELEVATION OF HORIZONTAL - BPO NON METALLIC PUMPS
Non metallic pump
  1. IMPELLER CASING
  2. IMPELLER
  3. BACK PLATE
  4. SHAFT SLEEVE
  5. BEARING HOUSING
  6. DRIVE END BEARING COVER
  7. GLAND COVER
  8. FAR END BEARING COVER
  9. OIL SEAL
  10. CASING MOUNTING RING
  11. GLAND PACKING
  12. SRB BEARING
  13. BREATHER
  14. SHAFT
  15. DRACB BEARING
  16. OIL LEVEL INDICATOR
  17. HOUSING SUPPORT
  18. OIL SEAL
  19. OIL DRAIN PLUG
  20. 'O' RING
  21. THROWER
  22. TEFLON WASHER
  23. CASING GASKET